Gold Member Since 2016
Audited Supplier
Wuhan Boli Chemical Co., Ltd.

Glue Stick, Hot Melt, Adhesive manufacturer / supplier in China, offering Factory Sell Directly Hot Melt Glue Stick, Manufacturer Provides Straightly Sbs Spray Adhesive for Mattress, GBL Strong Bonding Sbs Sofa Spray Adhesive and so on.

(/ )

Supplier Homepage Product Factory Sell Directly Hot Melt Glue Stick

Factory Sell Directly Hot Melt Glue Stick

This product is currently unavailable, but you may contact the supplier directly, for further interest.
Basic Info
  • Model NO.: B-03
  • Morphology: Solid-State
  • Material: EVA
  • Main Agent Composition: Natural Polymer
  • Promoter Composition: Curing Agent
  • Color: White
  • Origin: China
  • Bonding Function: Structural Adhesive
  • Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
  • Classification: Hot Melt
  • Characteristic: Weatherability
  • Composition: Organic Material
  • Trademark: GBL
Product Description

Factory Sell Directly Hot Melt Glue Stick

Factory Sell Directly Hot Melt Glue Stick
Factory Sell Directly Hot Melt Glue Stick

Main Features:

1) Strong binding strength
2) Nice transparency
3) No glue-drop when operate,the performance is good

4) Fast solidification

5) Ageing-resistant

6) Anti-yellowing

7) Carbonation resistance

8) Nontoxic,environmental

9) Low&high temperature resistance


Main Apply to:

Main use to the Decorations,Handicraft,ceramics,toys,Wooden products,Packing,especially for EPE pearl cotton,plastic products,clothing,paper carton and case,paper converting,Auto parts& Accessories,toys,Light and Lamp,Computer assembly,electronic components.



Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5ºC and 20ºC.


Shelf Life:

Best used within 24 months from date of manufacture when stored under the above conditions in the original unopened containers or packing.



1. Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
2. Smooth surfaces are more difficult to adhere than rough,or porous surfaces.
3. Joint as quickly as possible for keeping optimum binding strength.
4. Apply firm pressure and do not adjust joint has been made.
5. If substrates could be pre-warmed to 60ºC at least,eg metal surfaces,the stronger bond strengths will be achieved.
6. Opening and Curing time will changing along with the changes of Temperature Glue,Coating,Environmental
7. Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
8. General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour.

Send your message to this supplier
Mrs. Echochang
Merchandiser Manager
To: Mrs. Echochang

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category